|
|
M60 Professional Monitor
Click the image to enlarge
Product Information
This is the M60 monitor only. It has no internal crossover. You'll need an NHT XdA or an electronic crossover and a coupl of amplifiers to bi-amp them with or you'll need to be a serious speaker hobby-boy and build your own crossover.
Do you own an Xd system?
If so, buy a pair of these M60 monitors at an unbelievable price and upload the M-60 filter set from NHT and now you have a state-of-the-art professional monitor system. Use with or without the optional S80 professional subwoofer system. The price shown is for 1 monitor. A pair of M60 monitors and the XdA used to sell for $5000! If you have an XdA, you can now own this system along with your consumer Xd speakers and have 2 system in 1 for a fraction of the cost.
Don't have a XdA?
If so, buy a pair of these M60 monitors at an unbelievable price and get yourself an electronic crossover and a couple of amplifiers and bi-amp them for an amazing and honest professional monitor system.
Are you a speaker hobby-boy?
Buy these monitors and make your own crossover. Write us for the driver specification (if you're serious) so you can begin to design your own passive crossover while we ship the speakers to you.
Reviews
(0) Reviews
Specifications
| Configuration |
2-way
acoustic suspension design |
| Woofer |
6.5"
magnesium cone, super linear motor |
| Tweeter |
1”
aluminum dome, ferro-fluid cooled,
textile surround |
| Magnetic
shielding |
Full |
| Amplifier
Power |
150W
RMS x 4, 300W x 4 peak |
| Peak
Acoustic Output |
112dB
SPL(100ms pink noise at 1M) |
| Residual
acoustic noise |
<15dB
SPL@1M |
| System
THD @90dB SPL |
<0.3%
(100Hz-20kHz @1M) |
| Frequency
Response |
55Hz-20kHz
+/-0.5dB , -6dB LF cutoff:40Hz
|
| Loudspeaker
Dimensions |
15”
x 13” x 10” |
| Weight |
17.5
lbs. |
| Loudspeaker
Enclosure Materials |
Machined
MDF of various thicknesses |
|
|
|
|
Tell a Friend
