|
|
IWS In Wall Subwoofer Module
Product Information
NHT's IWS in-wall subwoofer system offers real bass to 27Hz and fits in a 2" x 4" wall! The secret to this phenominal accomplishment was the development of a special 12" alunimum cone woofer that features the magnet mounted "inside" of the woofer basket rather than hanging on the back of the basket. This unique geometry required we flatten the woofer cone shape and increase the dust cap diameter to stiffen the cone. The result is an in-wall subwoofer that's not an oxymoron.
Specifications
The iWS subwoofer requires the NHT A1 monaural amplifier and X1 electronic crossover which are both sold separately. A single A1 amplifier can drive 2 IWS subwoofer modules in parallel.
In most installations we recommend installing 2 IWS subwoofer modules. This will assure you of ample bass as well as make the room's bass response much smoother.
System Type: Modular powered in-wall subwoofer system (subwoofer module only)
Configuration: Acoustic suspension
Woofer: 12" aluminum cone
Frequency Response: 27Hz - 140Hz, +/- 3dB
Sensitivity: 86dB (2.83V at 1M)
Impedance: 12 ohms nominal
Recommended Amplifier Power:20W/ch minimum, 150W/ch maximum
Inputs: 2 each professional grade, gold plated spring posts
Cabinet Dimensions: 14"W x 36"H x 3.38"D
Bezel Dimensions:10.125" H 14 1/4" Finish: Black
Note: Subwoofer enclosure must be used with NHT A1 Amplifier and X1 Crossover sold separately.
|
|
|
|
