|
|
XdW Powered Subwoofer - Closeout!
Click the image to enlarge
Product Information
The XdW is specifically designed for use with NHT's XdA processing amplifier. The subwoofer has a 500W Power Physics amplifier built-in. The input is XLR. The XdW has a simple single volume control.
The XdW has no "tuning" or "crossover" controls and relies on the XdA to control the frequencies. If you plan on using this with a system without an XdA your AVR will need to provide all crossover functions and phase control.
If you have a consumer Xd system this will likely be your last opportunity to add an additional subwoofer to the system. Adding a 2nd XdW will allow you to use 2 additional filter sets (flat to 20Hz and high SPL filters) as well as allow your system to fill a larger room and provide flatter bass response.
Reviews
(0) Reviews
Specifications
| Type | Powered Subwoofer | | Configuration | Acoustic Suspension Subwoofer | | Woofer | 2 - 10" Aluminum cone | | Magnetic Shielding | None | | Amplifier Power RMS | 500W | | Amplifier Power Peak | 700W | | Amplifier Input Impedance | 10k | | Peak Acoustic Output | 116 dB SPL @ 60Hz | | Residual Hum/Noise | <10 dB SPL | | THD @ 90 dB SPL | <0.3% above 60Hz | | Crossover Frequency | 110kHz | | Crossover Slopes | 48dB LP, 48dB HP | | ±1 dB response | 28Hz - 110Hz | | Input Connectors | XLR | | Output Connectors | - | | Input Sensitivity | -10 dB or +4 dB | | Speaker Dimensions | 22.1" x 11.2" x 13" (H x W x D) | | Speaker Weight | 57lbs. | | Speaker Material | BMC and MDF | | Controls | Bass trim | | Indicators | Power, Standby, Fault |
|
|
|
|
Tell a Friend
