Omnimount 20.0 Speaker Wall Mount

Click the image to enlarge

Product Information

OmniMount's 20.0 Stainless Steel speaker wall mount is a unique, top-of-the-line and industry standard speaker mounting solution for NHT and other brands of speakers weighing up to 20 lbs (9 kg). How it works is the clamp assembly is mounted to the ceiling or wall - be sure you hit a stud or ceiling joist.  An included mounting plate (not shown) with 2 - 1/4 holes is then mounted onto the speaker (true for most NHT speaker that use the 20.0 wall or ceiling bracket), the ball/shaft is bolted to this plate that is on the speaker.  Finally, the speaker with the ball extending from the back is positioned into the jaws and clamped into position.  The connected speaker can be moved or adjusted freely  to the desired position to maximize the speakers coverage of the listening area.  An Allen tool is also included in the kit to lock the clamp into the ball/shaft.

Please note, all Omnimount brackets are packaged and sold EACH, so you'll need two brackets for a pair of speakers.

Installation: We rate the installation of this bracket as difficult.  As such, and for safety, we recommend a professional installer.

Features: 

- Black finish (only)
- Polymer-injected ball controls resonance frequencies for better sound 
- Stainless steel hardware for strength and durability
- Suitable for all-weather use 
- Ball and clamp design for greater mounting flexibility
- Sold as a single speaker mount
- Includes clamp and jaw 
- Includes complete hardware kit including a mounting plate

Tools Needed: 

1/4" drill bit 
5/16" Masonry Drill Bit 
Hammer 
Level 
Open end Wrench Set 
Pencil 
Phillips Screwdriver 
Power Drill 
Stud Finder 
Tape Measure

Specifications

Fits most: Bookshelf speakers

Supports up to: 20 lbs (9.1 kg)
Thread size: 3/8”- 16 TPI
Tilt: +/-30º
Pan: 180º
Base Rotation: 360º

Black Only - Select when adding to cart!

Fits the following NHT Speaker Models:

NHTPro M-00

Classic Absolute Zero (speaker serial number is higher than 0100002702)
Classic Two
Classic Three
Classic 2C (must drill holes and use 2 mounts)
Classic 3C (must drill holes and use 2 mounts)

Super Audio SB2
Super Audio SB3
Super Audio SC2 (must drill holes and use 2 mounts)
Super One
Super Center (must drill holes and use 2 mounts)

AC-1 (must drill holes and use 2 mounts)
AC-2 (must drill holes and use 2 mounts)
AC-3 (must drill holes and use 2 mounts)
VT2C (must drill holes and use 2 mounts)
VS2/VS2a (must drill holes and use 2 mounts)

Brochure

Owners Manual

Online Reviews